Wingate brake and steering centre

Welcome to our BernzOmatic product page. On this page you will find a sample of this extensive range of torches and tools for soldering and brazing. If you cannot find what you are looking for, please do not hesitate to contact us and we will most likely be able to help you out. For direct enquiries, call us on telephone number +27 (0)11 3347030 and ask for Raven (ext. 202), Billy (ext. 206), Isidore (ext. 238) or Saul (ext. 220).

Mixed Gas -- These torches use a butane/propane mix for soft soldering, hot blow, paint stripping, tile/label removal, etc. Temperature up to 1750 degrees Celcius.

Propane -- Produces more heat than mixed gas. For faster and hotter soldering, general heating, loosening rusted nuts and bolts, removing caulk or putty, thawing frozen pipes, etc. Temperature up to 1850-1950 degrees Celcius.

MAPP gas -- This fuel (Methyl Acetylene Propadiene) burns very hot and gets the job done up to 33% faster than propane, thus saving on time and fuel. For rapid soft soldering, hard soldering, brazing (copper, bronze, silver) and heavy repairs. Temperature up to 2000 degrees Celcius.

The small images shown below are intended to give you a quick impression of the article. Click on the small image to see a larger version. This new image will open in a new browser window. Close this window to return to the current page.

MG9 16oz. Disposable MAPP gas cylinder. For use only with multi-application torches and appliances. T757 Hand Torch. Heat output: 3400W+. Self-igniting, ultra swirl flame. Removable brass tip, trigger lock. For use with propane and MAPP gas. JTH7 Hose Torch. Heat output: 3700W+. Pressure regulated to burn in all directions. 4 foot hose, turbo-charged swirl action flame, pressure regulator, flash back arrestor. For use with propane and MAPP gas.

TS4000T Trigger Start Torch. Heat output: 1950W+. Instant on/off trigger increases fuel savings and convenience. Lock button, swirl flame, pressure regulated to burn in all directions. For use with propane and MAPP gas. TX9 14.1oz. Disposable propane cylinder. For basic use torches and most portable applications requiring propane. Also suited for use with recreational propane appliances. TS3000KC Quickfire Kit. Consists of Quickfire self-igniting torch and propane cylinder. Heat output: 1460W. Regulated to burn upside down. Trigger start for easy lighting. Adjustable, general purpose flame. For propane only.

BF9-E 2.1oz. Disposable butane cylinder. For use with micro torches, mini torches and lighters. PS135 Spark igniting soldering iron. Heat output: 250W. 30 seconds warm-up time. Long lasting steel tip. Refillable. Use 80 min. before refilling. For butane (BF9-E) only. PS100 Soldering iron. Heat output 135W. 30 seconds warm-up time. Long lasting steel tip. Refillable. Use 80 min. before refilling. For butane (BF9-E) only.

ST1100T Table top micro torch with push button igniter. Heat output: 165W. Precision needle point flame. Refillable. For butane (BF9-E) only. 810-E Flame spreader with adaptor. For paint removal and general heating applications that require flame spreading.


MG9 16oz. Disposable MAPP gas cylinder. For use only with multi-application torches and appliances.	T757 Hand Torch. Heat output: 3400W+. Self-igniting, ultra swirl flame. Removable brass tip, trigger lock. For use with propane and MAPP gas.	JTH7 Hose Torch. Heat output: 3700W+. Pressure regulated to burn in all directions. 4 foot hose, turbo-charged swirl action flame, pressure regulator, flash back arrestor. For use with propane and MAPP gas.


TS4000T Trigger Start Torch. Heat output: 1950W+. Instant on/off trigger increases fuel savings and convenience. Lock button, swirl flame, pressure regulated to burn in all directions. For use with propane and MAPP gas.	TX9 14.1oz. Disposable propane cylinder. For basic use torches and most portable applications requiring propane. Also suited for use with recreational propane appliances.	TS3000KC Quickfire Kit. Consists of Quickfire self-igniting torch and propane cylinder. Heat output: 1460W. Regulated to burn upside down. Trigger start for easy lighting. Adjustable, general purpose flame. For propane only.


BF9-E 2.1oz. Disposable butane cylinder. For use with micro torches, mini torches and lighters.	PS135 Spark igniting soldering iron. Heat output: 250W. 30 seconds warm-up time. Long lasting steel tip. Refillable. Use 80 min. before refilling. For butane (BF9-E) only.	PS100 Soldering iron. Heat output 135W. 30 seconds warm-up time. Long lasting steel tip. Refillable. Use 80 min. before refilling. For butane (BF9-E) only.


ST1100T Table top micro torch with push button igniter. Heat output: 165W. Precision needle point flame. Refillable. For butane (BF9-E) only.	810-E Flame spreader with adaptor. For paint removal and general heating applications that require flame spreading.